Outfitted together with the zero leak bidirectional checking sole-noid valves, this electrical power unit is intended for your operation of two independent circuits. Which are respectively for that most important and subordinate platforms of your double scissors lift. Two cut-off valves are utilized for lowering the machine manually in situation of power loss. If a lot more independent circuits are needed for the application please get hold of us for availability.
Remark: 1. Please seek advice from our revenue engineer for your distinctive pump displacement, motor electrical power or tank capacity.
2. CSA or UL certified motors are available on request.
1. The AC motor is of S3 duty cycle, which can only function intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean all of the hydraulic elements concerned ahead of set up of the power unit.
three. Viscosity of your oil shoud be 15~46 cst,as well as oil ought to be clean and totally free of impurities,N46 hydraulic oil is suggested.
4. The energy unit should really be mounted vertically.
five. Check the oil level in the tank following the first running from the energy unit.
6. Oil changing is required immediately after the original one hundred operation hrs,afterwards after each 3000 hrs.
Energy UNITS FOR DOUBLE-SCISSORS LIFT