Materials Handling Electrical power UNIT 2
Common Description
This power unit functions electrical power up gravity down circuit. Activate the start out solenoid to start the motor to lift the machine. The lowing movement is activated from the solenoid valve together with the reducing speed controlled through the pressure compensated flow handle valve. Items of this series can be broadly utilized in the field of logistic devices for instance fork lift, mini lift table, and so on.
Exclusive Notes
1. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean the many hydraulic elements concerned in advance of mounting the power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst,which should also be clean and free of impurities, N46 hydraulic oil is proposed .
4. Oil changing is needed after the preliminary 100 operation hours,afterwards after each and every 3000 hours.
5. The electrical power unit need to be mounted horizontally.

Materials Managing Electrical power UNIT one
Common Description
This power unit is built for that fork lift business, consisting of highly effective gear pump, DC motor, manual raise and reduced valve, tank, ect. The up and down motion are managed through the lever of the guide release valve, which can be outfitted with an electrical switch to activate the motor. The lowing velocity is controlled through the pressure compensated flow management valve.
Exclusive Notes
1. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean all of the hydraulic components concerned before set up of the power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which should really also be clean and totally free of impurities, N46 hydraulic oil is suggested .
4. Oil changing is needed just after the original one hundred operation hours, afterwards once each and every 3000 hours.
5. The energy unit proven is designed to be mounted horizontally.