Little Pitch Chain

The smallest chain complying to ANSI is 25 of 6.35 mm pitch. Nevertheless, in response on the demands for smaller sized chains in recent times for higher technological innovation machinery such as office products, health-related machines and industrial robots, we deliver 15 of four.7625 mm (3/16 inch) pitch as well as 15H1 as a high-power edition of 15. These substantial precision chains are produced under severe top quality management specifically needed for small sizes, taking put on resistance also under consideration.
Variety of chain
Refer towards the “Low-speed selection”. However, the chain operation pace is often set substantially higher based on the sort of lubrication as shown inside the table beneath.
Connecting hyperlinks and offset back links
R connecting links are used for small pitch chains. Nevertheless, due to the fact their power is decrease than that on the base chain, and because the clip is more likely to come off in high speed operation, the use of connecting links is just not encouraged. Use a loop chain with no attaching connecting hyperlinks.
Offset links are available for chains apart from 15 and 15H1, but their use is not really recommended for your exact same motive as stated for the R Connecting backlinks.
Working speed and sort of lubrication
15: A large precision mini-pitch bushing chain that’s smaller sized than a compact drive chain for general applications, 25
25: Smallest bushing chain amid ANSI conventional chains making use of curl bushings.
35: A ANSI conventional bushing chain suitable for small precision machines that need high power.