La forma de conectar las cadenas de juntas tóricas Observaciones para conectar las cadenas de juntas tóricas generales

one.A connecting website link of an O-ring Chain for general application is pre-coated with grease on the pins. Ahead of connection, confirm the grease over the surfaces of pins, and in case the volume of grease is tiny, apply grease with bare hands. (If gloves are employed, the grease are going to be absorbed by the gloves.)
Example: Once the connecting link (I) of an O-ring chain for standard application is
shipped, O-rings are fitted in the roots on the pins. If the O-rings come loose on account of vibration all through transport, refit the O-rings in on the roots of the pins.
In this instance, make sure to return the grease collected with the roots of the pins towards the central surfaces of the pins, a lot more at portion A than at portions B proven during the above illustration. (Portions A is worn because of sliding using the bushings.)
two.The chain is often most effortlessly connected over the teeth of a sprocket. Engage the hyperlinks at each ends in the chain together with the sprocket teeth and match connecting pins. Should the sprocket is usually moved, the chain may also be linked to the loosened side.
three. Connecting procedure
one.Verify that O-rings are attached to your roots of your pins.
two.When the volume of grease applied within the connecting pins is small, coat the pins with grease with the central portions.
3.Insert the connecting pins into the bushings of your inner links at both ends.
four.Verify the grease is utilized towards the whole encounter from the O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins in to the connecting plate and though pressing the connecting plate, install the spring clip. Verify irrespective of whether the head (the finish without a split) of the spring clip is turned while in the feeding direction in the chain. (See the next illustration.)
6.You’ll want to confirm that the spring clip is securely fitted inside the clip grooves in the connecting pins.
This completes jointing with the connecting link. Note that grease to the surfaces of connecting pins and O-rings may be eliminated throughout installation get the job done. In this instance, re-grease working with the grease around the surface from the base chain or the grease within the polyethylene bag by which the connecting link was contained.