DUMP TRAILER Energy UNIT

DUMP TRAILER Energy UNIT-DOUBLE ACTING
Basic Description
This electrical power unit includes a energy up power down circuit with load holding on the two A & B ports. A strain compensatred movement handle can be added to circuit to manage the decent pace in the cylinder.
Particular Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic parts concerned prior to installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which must also be clean and no cost of impurities. N46 hydraulic oil is advised.
four. The electrical power unit must be mounted horizontally.
5. Check the oil degree while in the tank right after the first working on the energy unit.
6. Oil altering is needed just after the initial a hundred operation hours, afterwards after each 3000 hrs.

DUMP TRAILER Electrical power UNIT- SINGLE ACTING
Basic Description
This energy unit features a electrical power up gravity down circuit. Start out the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve can be provided if required. Also a pressure compen sated movement handle can be added towards the circuit to manage the descent pace of your cylinder.
Remark: Please seek the advice of our income engineer for that various pump displacement, motor energy or tank capacity.
Distinctive Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean each of the hydraulic elements concerned just before installation of the electrical power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which really should also be clean and no cost of impurities.N46 hydraulic oil is encouraged.
4. The electrical power unit ought to be mounted horizontally.
five. Check the oil degree from the tank after the original working of your power unit.
six. Oil transforming is needed right after the original 100 operation hrs, afterwards the moment each and every 3000 hrs.

Tags

acoplamento de substituição do acoplamento rotex

Como um dos principais fabricantes, fornecedores e exportadores de acoplamentos de mandíbulas flexíveis, oferecemos acoplamentos de mandíbulas e muitos outros produtos de acoplamentos. Entre em contato conosco para mais detalhes.

Correspondência:[email protected] Fabricante fornecedor exportador de substituição de acoplamento rotex

Catálogo dos produtos:


Últimos produtos

Português do Brasil