O-Ring Chain (LD)/X-Ring Chain (LX)

Highest wear resistance available by sealing grease in between pins and bushings
The durability of chain is substantially enhanced due to the fact grease is sealed among the pins and bushings by O-rings. The O-ring chain is the most dependable model in the Ultimate Life Chain Series with its outstanding wear resistance even during the circumstances or environments the place chain servicing is tough.
Advised makes use of.
?Circumstances in which frequent chain substitute is needed as a result of dress in stretch
?Circumstances where lubrication throughout the service is unattainable
?In an atmosphere with significantly soil, sand, dust, and so on.
?Applications that need power higher than that of a sintered bushing roller chain
Other functions
?Lowering noise. (The noise degree is 3 dB lower in contrast to common roller chains.)
?Decreasing vibration using the friction designed by O-Ring. (The electrical power reduction due to the friction is almost negligible, since the frictional force in between the pins and bushings is for generally during the applications.)
Selection of chains
The strength of an O-ring chain is nearly the same as that of a normal roller chain. (Since the pins are longer than these of standard roller chain, the typical rupture strength is somewhat reduced.)
For choosing a suitable chain, refer to “Selection of Chains” .
Once the service ambient temperature is higher than 80° C, particular heat resistant O-rings have to be utilized. In this case, contact us for more data.
Connecting backlinks and offset back links
Two varieties of connecting back links are available: clearance match and interference fit. When large strength or durability is required, use interference-fit connecting hyperlink. Only 2POJ is accessible since the offset hyperlink for all sizes.
звездочки
O-ring chain employs longer pins than a conventional roller chain. When working with multiplex O-ring chain, the standard sprocket for multiplex chains cannot be employed.
Осторожность
O-ring chain will not be encouraged in applications wherever solvents or other substances could attack “Nitric Rubber”. Specific materials O-rings can also be readily available for these conditions: Please seek the advice of us for details. On the whole, “Nitric Rubber” is broken by make contact with with all the following chemical resources.