施肥机驱动更换 FSD-08 FSD-10 FSD-15 FSD-20 FSD-40

施肥机驱动更换 FSD-08 FSD-10 FSD-15 FSD-20 FSD-40

分类:

描述

施肥机驱动更换 FSD-08 FSD-10 FSD-15 FSD-20 FSD-40

The gear drive is a key component in any spreader assembly, and is used to drive the rotary plates, fans, and conveyors in the spreader equipment. Spreaders are used to deposit uniform layers of material (such as grass seeds, sand, salt, topdressing, granular fertilizer, and rock on the ground by using conveyor aprons to transmit a steady stream of material to a fan or rotating disk, thereby spreading the material. The spindle-gear drive may be powered by an electric motor (found in industrial fertilizer tools) or by a hand-turned wheel (found in hand-driven vans used to deposit grass seed on front lawns). While all gear drives share the same core design and functionality, EPG offers a variety of gear drives in a variety of configurations and styles to suit different extension scenarios. For more than 40 years EPG has been the premier resource for providing reliable, high-performance powertrain solutions for the most demanding spreader applications.

施肥机驱动变速箱

施肥机驱动变速箱

施肥机驱动变速箱

施肥机驱动变速箱

The geared spreader has a wide. range of applications in consumer, commercial and industrial markets. Because they can reliably turn circular disks and even release layers of media on the ground, users are using them in a variety of situations, from personal landscaping to tightly regulated food production applications. Some of the most common applications of spreader gear drives in commercial and industrial environments include Agricultural and lawn spreaders. Fertilizer applicator. Lime spreader. Garbage spreader. Manure spreader. Rock spreader. Salt spreader. Seed spreader. Shaving spreader. Side unloading spreader. Topdressing mixed spreader. Contact advanced transmission for the on-board spreader to order custom gear transmission for the spreader

 

Smart Gear Box for Spreader

施肥机驱动变速箱

施肥机驱动变速箱

If the gear box on the COSMO fertilizer spreader is damaged please replace it with this gear box.

This gearbox replaces COSMO #322.0.02 and will make your fertilizer machine look good again. Specifications. Cosmo 322.0021-3/8″ Input shaft 6 splines. Shaft length 3-1/2″.1″ Output shaft Shaft length: 3″ Holes on output shaft:1-1/2″ center to center.6 mounting holes low: 11″. Oh: 9″. Gear ratio: 1:1. Bolt hole spacing:2-3/8″ long side center to center Bolt hole spacing 3-3/4″ center to width center. There is a zirk in the gearbox and we Supply various fertilizer spreader parts at EPG@.

zh_CNZH